M601 M1601 M1820 MTS01 High Precision Digital Thermometer

2022-10-29
●Overview:
■M601, M1601, M1820, and MTS01 is MinYuan fourth generation of digital high-precision temperature sensor with a typical temperature measurement accuracy of 0.1℃. The temperature sensing principle is based on the characteristic relationship between the semiconductor PN-junction temperature and voltage, through small signal amplification, analog to digital conversion and digital calibration, the 16-bit digital temperature data can be easily accessed. It has strength of high accuracy and consistency, long lifetime, low power consumption, programmable configuration flexibility. The thermometer integrates an EEPROM as a storage for ROM ID of the sensors, temperature alarm threshold, temperature calibration correction values and user-defined information such as sensor node information. Each sensor IC has a unique 64-bit serial number as ROM ID, and is fully calibrated before ship out. The IC have one-wire or I2C interface for the host processor to access. One-wire interface fits for cost-effective multiple nodes access through one data bus in a long cable. The search for the IC’s ROM ID, temperature data memory access and functional configuration can be easily controlled by one GPIO of the microprocessor. I2C interface is suitable for high-speed board-level data communications, with the maximum interface speed up to 400kHz.
■High-precision temperature measurement region can be customized upon requirement. For example, for wearable thermometer and cold chain logistics range, the in-fab calibration procedure is different. Therefore the product series is divided into classes of 0.1 ℃ /0.5 ° C for different working conditions and precision requirement at different price, as shown below.
●Features:
■Highest accuracy: ±0.1°C, (or ±0.5°C, accuracy in the product series)
■-70°C~+150°C working temperature range
■The standard to the series has a default 16-bit ADC output, with a maximum resolution of 0.004°C
■Configurable conversion time: 10.5ms/5.5ms/4ms
■Configurable single shot mode and periodic data acquisition mode
■User configurable alarm threshold
■32-bit non-volatile storage space for user data
■Wide supply voltage range 1.8V-5.5V
■Typical standby power consumption is 0.1μA@3.3V, maximum peak power consumption is 0.45mA@3.3V and average temperature measurement current is 5.2 μA (@3.3V, 1 sample per second)
■Every thermometer has a unique ROM ID for easy network addressing
■One-wire and I2C interface

MYSENTECH

M601M1601M1820MTS01M601ZM1601ZM1820ZMTS01ZM1601WM601WM1820WMTS01WM601PM1601PM1820PMTS01PM601BM1601BM1820BMTS01B

More

Part#

High Precision Digital Thermometerdigital high-precision temperature sensor

More

Body temperature measurement ]animal temperature measurement ]Electronic thermometer ]Medical Electronics ]Cold chain logistics ]Heat meter gas meter water meter ]Board level temperature monitoring ]Environmental temperature monitoring ]Smart home ]Consumer electronics ]Temperature measuring instrument ]

More

Datasheet

More

More

Please see the document for details

More

More

DFN8;SOT23;TO92S;SOT23-3

English Chinese Chinese and English Japanese

2022/09

V4.4

3.4 MB

- The full preview is over. If you want to read the whole 47 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: