GPS & BEIDOU module GNS 3301B Datasheet

2022-10-28
■INTRODUCTION
▲The GNS3301B module supports GPS and BEIDOU simultaneously. With a very small form factor of just 10.0 by 9.3 by 2.0 mm, GNS3301B is an ideal GNSS solution for many applications.
▲GNS 3301 is based on the advanced new generation MediaTek MT3333 GNSS chip. First Fixes after just a few seconds are achieved with the help of A-GPS using EPO™ (Extended Prediction Orbit) and the EASY™ “self generated orbit prediction” algorithm. EASY™ (Embedded Assist System) does not require any resources and does not need any information from the network.
▲Due to its capability to use BEIDOU and GPS at the same time, GNS3301B benefits from the higher availability of satellites in critical environments. The navigation performance and accuracy is further improved by using the correction data from SBAS (WAAS, EGNOS, GAGAN, MSAS), QZSS or DGPS(RTCM).
▲The low power design makes it easy to implement this module in power sensitive, battery supplied applications. Very low power requirements (voltage regulator makes it easy to run the module with various power supplies and allows direct connection to LiIon batteries. Further power savings re possible with AlwaysLocate™ power management feature. It adaptively adjusts power consumption depending on the environment and motion conditions, in order to achive a balance between fix rate, power consumption and position accuracy.
▲In professional timing applications the outstanding high accuracy PPS (pulse per second) hardware pin is used for synchronization to GPS second. Typical accuracy is 10ns RMS jitter.
▲GNS3301B offers the industry’s highest level of navigation sensitivity down to -165dBm. It has superior dynamic performance at high velocity and provides effective protection against interference signals using MTAIC™ ( Multi-tone active interference canceller). Up to 12 independent channel interference continuous wave jammers can be eliminated or reduced.
▲The embedded logger function LOCUS with a 16-hrs on chip memory makes this GNSS module a complete track logger for many applications.
■Features
▲BEIDOU and GPS simultaneously
▲99 acquisition-/ 33 tracking channels
▲Ultra high tracking/navigation sensitivity: -165dBm
▲Extremely fast TTFF at low signal level
▲QZSS, SBAS (WAAS,EGNOS,MSAS,GAGAN) or DGPS(RTCM) correction support
▲A-GPS by EPO “Extended Prediction Orbit” ™ enables 7/14 days prediction
▲12 Multitone Active Interference Canceller (MTAIC) for GPS-in-band jammer rejection
▲EASY ™ : Self generated orbit prediction support
▲AlwaysLocate ™ : Intelligent Algorithm for power saving
▲Embedded logger function
▲High accuracy 1PPS output
▲NMEA-0183 or binary protocol
▲High update rate (up to 10/s)
▲GPS+BEIDOU consumption current(@3.3V):
◆Acquisition: 26mA typical
◆Tracking: 21mA typical
▲Low backup current consumption 15uA, typical
▲SMD type , stamp type adaptor availble
▲Small form factor: 10x9.3x2.0 mm

GNS Electronics

GNS 3301BGNS3301B4037735105188GNS3301

More

Part#

GPS & BEIDOU module

More

Navigation ]In-vehicle Navigation equipment ]Dynamic Navigation ]Portable (“nomadic”) devices ]Netbooks ]tablet PCs ]mobile phones ]Timing ]Location based applications ]GPS Logger ]GPS Tracker ]Security devices ]Camera equipment ]Geofencing ]

More

Datasheet

More

More

Please see the document for details

More

More

SMD

English Chinese Chinese and English Japanese

Jul 1 2015

V1.3

1.3 MB

- The full preview is over. If you want to read the whole 26 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: