RocketPort® and RocketPort RA Series Setting the DIP Switch Reference

2022-10-28
■Setting the DIP Switch
▲The following table is provided for you in cases where you did not receive device driver documentation or for your reference. The device driver documentation provides controller installation procedures and advises you how to set the DIP switch.
▲To prepare your controller for installation, you may need to set the I/O address DIP switch. The default I/O address range is 180 through 1C3.
▲For the first controller, select a 68-byte I/O address range. For subsequent controllers, select a 64-byte range.
▲RocketPort controllers use I/O address ranges at 400 hexadecimal (hex) intervals above the I/O range. Most peripherals use I/O address ranges between 0 and 3FF hex. If you have peripherals installed above 400h, you may experience an I/O conflict. The first controller determines the settings for additional controllers.

COMTROL

RocketPort®RocketPortRocketPort RA SeriesRocketPort RA

More

Part#

device drivercontrollers

More

More

User's Guide

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

January 16, 1996

First Edition

54 KB

- The full preview is over,the data is 2 pages -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: