RocketLinx ES7506 Industrial Managed PoE Switch User Guide
●The RocketLinx ES7506 is designed for industrial PoE applications such as IP surveillance or wireless access points, where the power source is not conveniently located. The ES7506 provides:
▲Four 10/100BASE-TX Power over Ethernet Plus ports
▲Two redundant 10/100BASE-TX uplink ports
●The ES7506 supports intelligent PoE control and schedule management. Each of the four PoE ports can be configured in a weekly schedule by hourly basis and PoE on/off can be remotely controlled via SNMP and web user interface.
●It is compliant to both IEEE 802.3af PoE as well as the pioneer standard of IEEE 802.3at PoE Plus designed for boosting PoE delivery up to 30W in each of the four PoE ports. The ES7506 can auto-detect 24V and 48V power input and can deliver 24V and 48V PoE outputs which allow more applications where 48VDC is not an option.
●The two uplink ports can be configured as Redundant Ring ports recovering network failure in less than 5ms, or RSTP ports integrating with other standard switches. Full network management features such as SNMP v3, QoS, IGMP v3 are all supported. If the powered device fails to respond after a pre-configured time interval, the ES7506 will reboot the powered device and continue to monitor the powered device in every preconfigured time interval. Also, unmanageable powered devices can be managed through the ES7506.
●The IP31 rigid aluminum flat casing and wide operation temperature range ensure reliable operation in places such as mass transit vehicles or outdoor usage.
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
January 31, 2014 |
|
Rev. F |
|
2000529 |
|
7.5 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.