RocketPort Universal PCI Plus User Guide
●The RocketPort uPCI Plus 422 series multiport serial card fits into the PCI slot of a personal computer, and uses a 43 MHz processor that is specifically designed to process asynchronous serial communications.
●The RocketPort uPCI Plus 422 supports RS-422 exclusively, in either DTE or DCE mode. It supports 3.3 and 5.0 volt PCI bus architecture and is compatible with 32-bit and 64-bit PCI slots. The RocketPort uPCI Plus 422 card supports communications speeds up to 921,600 baud.
●The RocketPort uPCI Plus 422 series uses Comtrol Application Specific Integrated Circuit (ASIC) technology to replace most hardware functionality to minimize components, including:
▲The processor
▲A serial controller
▲Bus interface logic and other miscellaneous logic
●You can install up to four RocketPort uPCI Plus 422 cards in one computer, providing a maximum of 32 additional serial ports. The PC must comply with the PCI 2.2 specification or greater.
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
September 12, 2011 |
|
Rev. B |
|
2000370 |
|
1.1 MB |
- +1 Like
- Add to Favorites
Recommend
- Rosenberger Released Norma Plus UHD (Ultra High Density) Modular Fiber Panel System
- Smiths Interconnect Offers SpaceNXT™ Aurora Series COTS Plus 2mm Hard Metric Backplane Connector for LEO Satellites
- MTA’s Revo Plus Dashboard for 5120 Başak Tractor
- TC350™ Plus Laminates for Higher Power Microwave and Industrial Heating Applications | Rogers
- Grepow Tattu Plus :the Smart Lipo Battery Pack That is Designed Especially for Unmanned Aerial Vehicles
- Jowat Receives ISCC PLUS Certification, Able to Manufacture Sustainable Adhesives Following a Mass Balance Approach
- Benewake‘s TF Series Single-point LiDAR Designed for Forks Obstacle Avoidance
- Maswell Newly Launched Combo Antenna AN.AG50.2Cell.4WiFi.2M Covering 5G 2X2 MIMO Plus WiFi 7 4X4 MIMO Applications
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.