RocketPort Universal PCI SMPTE User Guide
●The RocketPort uPCI SMPTE series multiport serial card fits into the PCI slot of a personal computer, and uses a 43 MHz processor that is specifically designed to process asynchronous serial communications.
●The RocketPort uPCI SMPTE supports RS-422 exclusively, in either DTE or DCE mode. It supports 3.3 and 5.0 volt PCI bus architecture and is compatible with 32-bit and 64-bit PCI slots. The RocketPort uPCI SMPTE card supports communications speeds up to 921,600 baud.
●The RocketPort uPCI SMPTE series uses Comtrol Application Specific Integrated Circuit (ASIC) technology to replace most hardware functionality to minimize components, including:
▲The processor
▲A serial controller
▲Bus interface logic and other miscellaneous logic
●You can install up to four RocketPort uPCI SMPTE cards in one computer, providing a maximum of 8 to 32 additional serial ports. The PC must comply with the PCI 2.2 specification or greater.
●The RocketPort uPCI SMPTE conforms to the ANSI/SMPTE 207M-1997 Television – Digital Control Interface – Electrical and Mechanical Characteristics standard. The Society of Motion Picture and Television Engineers (SMPTE) 207M protocol permits the control of video and audio tape decks for editing purposes and can be used to connect controlled device such as, video routers and servers.
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
September 12, 2011 |
|
|
Rev. A |
|
|
2000560 |
|
|
1.1 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
