5510 DIGIPILOT: Acknowledgement device for manual work optical and acoustical notification

PublishTime：2022-10-26

■DIGIPILOT 5510 is optimized with DIGIFORCE® 9311, DIGIFORCE® 9310. The two devices are connected electrically 1:1 via the PLC interface of DIGIFORCE® 9311, DIGIFORCE®9310 and a 25 pin cable model 9900-K331. If DIGIFORCE®9311, DIGIFORCE® 9310 is controlled via PLC the connection must be done on the available second bushing on DIGIPILOT 5510. DIGIPILOT 5510 offers different operation modes that need to be activated by jumpers in the 15 pin Sub-min-D connector for both modes, active as well as passive, i.e. with or without acknowledgement.
■This acknowledgement can be effected via the indicator lights on the front side of the instrument or via an external button (normally open). At the beginning of a new measurement, the present evaluation is erased. In the operation mode "Confirmation and evaluation NOK" the red light stays switched-on, even at a new measurement start. It will switch-off only after acknowledging the "NOK" result by pushing the green button.

Brand of Product：	BURSTER
Part#：	5510 、 9900-K331 、 99160-165A-0090020 、 9310-Z001 、 9310-Z002 、 5510-Z001 、 9900-V160 、 9310 、 9311 、 9307 More Part#
Product Category：	Acknowledgement device More
Application：	More
Data Type：	Datasheet More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：
Language：	English Chinese Chinese and English Japanese
Date of Creation：	2016/8/3
Version Number：
Data Encoding：
Data Size：	1.6 MB

Data section preview(2pages)

- The full preview is over,the data is 2 pages -

Download

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits