UG461: MGM220P Wireless Gecko Module Radio Board User's Guide
●BRD4311B is a plug-in board for the Wireless Pro Kit Mainboard (BRD4002A) and the Wireless Starter Kit Mainboard (BRD4001A). It contains the MGM220P Wireless Gecko PCB Module.
●The mainboards contain an on-board J-Link debugger with a Packet Trace Interface and a virtual COM port, enabling application development and debugging the attached radio board as well as external hardware. The mainboards also contain sensors and peripherals for easy demonstration of some of the MGM220P's many capabilities.
●This document describes how to use the BRD4311B Radio Board together with a Wireless Pro Kit Mainboard or a Wireless Starter Kit Mainboard.
●BRD4311B RADIO BOARD FEATURES
■MGM220P Wireless Gecko PCB Module with 512 kB Flash, 32 kB RAM. Fully integrated chip antenna, RF matching network, crystals, and decoupling capacitors (MGM220PC22HNA2).
■8 Mbit low-power serial flash for over-the-air upgrades.
●MAINBOARD FEATURES
■Advanced Energy Monitor
■Packet Trace Interface
■Logic analyzer (BRD4002A only)
■Virtual COM Port
■SEGGER J-Link on-board debugger
■External device debugging
■Ethernet and USB connectivity
■Silicon Labs Si7021 Relative Humidity and Temperature sensor
■Low Power 128x128 pixel Memory LCD
■User LEDs / Pushbuttons
■20-pin 2.54 mm EXP header
■Breakout pads for Module I/O
■CR2032 coin cell battery support
●SOFTWARE SUPPORT
■Simplicity Studio
■Energy Profiler
■Network Analyzer
MGM220P 、 SLWSTK6104A 、 SLWRB4311B 、 BRD4001A 、 BRD4002A 、 BRD4311B 、 MGM220PC22HNA2 |
|
Wireless Gecko Module Radio Board 、 Wireless Pro Kit Mainboard 、 Wireless Starter Kit Mainboard 、 Wireless Gecko PCB Module 、 Radio Board |
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
September 2022 |
|
Revision. 2.0 |
|
|
|
2.6 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.