VS-CKP14-6, VS-CKP4-000, VS-CKP1K4/0-500 VeriSafe™ AVT Sensor Lead Connection Options

2022-10-24
●General Information
■The VeriSafe AVT is provided with 14 AWG Class K stranded sensor leads. Ferrules or terminals are recommended for all sensor lead terminations to ensure reliable connections with stranded wire.
■There are four sets of color-coded sensor leads (three conductors and ground). Each set of sensor leads has a detection lead and a termination lead. The detection lead is used to detect voltage and the termination lead is used to verify that the detection lead is in contact with a conductor. The termination lead does not detect voltage. There are no labels distinguishing the detection and termination leads because it is critical that they are both properly terminated.
■Sensor leads for each phase and ground must not be mechanically terminated at the same point for the AVT to function properly (see Figures 1 and 2). For example, if the termination shown in Figure 2 fails and the sensor leads remain in contact with each other (yet no longer in contact with the conductor), the installation test will be defeated for that set of sensor leads which may lead to inaccurate results from the AVT. If the detection lead is not contacting a conductor, the result of the installation test will prevent the AVT from returning a green absence of voltage indication.

PANDUIT

VS-CKP14-6VS-CKP4-000VS-CKP1K4/0-500

More

Part#

Sensor

More

More

Technical Documentation

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

April 20, 2021

1.6 MB

- The full preview is over. If you want to read the whole 11 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: