MCM-8000 MULTI CIRCUIT (8 CHANNELS) LEAKAGE CURRENT MONITOR INSTRUCTION MANUAL
■The purpose of this instrument is to memorize successively the leakage current values for long time period and it can display each value at the real time as well as memorizing the average leakage current values between the intervals (max. 8 channels) and can transmit the memorized data to PC by RS-232C.
■Also, it can set the observation value in the same way as protective relay and can memorize the generated & terminated year, date, time and max. current values incase of exceeding the observation value. At the same time, the alarm signal (non-voltage contact) is outputted when the value exceeds in any channel of 8 circuit.
■The clamp type CTs are used as sensor which enable to measure safety and simply.
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2017/10/16 |
|
|
|
|
|
372 KB |
- +1 Like
- Add to Favorites
Recommend
- Introduction to Bluetooth Multi Connection
- Real Chip-level Multi Sourcing - The Multi-sourced Power Modules Featuring IGBT M7 for Motion Control Applications
- Ole Wolff COMSOL Multiphysics® to Simulate Mechanical, Electrical, and Acoustical Parameters of Loudspeakers and Enclosures
- N-SPHERE: multi-constellation (GPS, GALILEO) & multi-frequency GNSS Precision Orbit Determination Receiver
- What Is a TX RX Multicoupler?
- How to Use Your Digital Multimeter Effectively
- How to use a digital multimeter (DMM)
- OWON XDS4000 Series Multi-Function Touch Oscilloscope with Maximum Bandwidth of 500MHz
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.