RO4725JXR™ & RO4730G3™ Antenna Grade Laminates Data Sheet
RO4725JXR™ and RO4730G3(™) laminates have the mechanical and electrical properties that antenna designers need. The laminates have a dielectric constant (Dk) of 2.55 and 3.0 and a loss tangent (Df ) of 0.0022 measured at 2.5 GHz when using LoPro® Reverse Treated EDC Foil. These values allow antenna designers to realize substantial gain values while minimizing signal loss. Materials are available with a demonstrated low PIM performance, with values better than -160 dBc (43dBm 1,900MHz signal).
RO4700 series antenna grade laminates are compatible with conventional epoxy and high temperature lead-free solder processing. These laminates do not require the special treatment needed on traditional PTFE-based laminates for plated through hole preparation. Lamination can be achieved using RO4400™ bondply series at 175°C. The resin systems of RO4700JXR materials are designed to provide the properties sought after by antenna designers. The glass transition temperature exceeds 280°C (536°F), leading to a low Z-axis CTE, excellent plated through hole reliability, and lead-free solder processability.
RO4725JXR™ 、 RO4730G3™ 、 RO4700™ series 、 RO4700™ 、 RO4700 series 、 RO4700 、 RO4700JXR |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
092322 |
|
|
|
92-168 |
|
425 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.