Uplynx XS8001-T-NG48NRY SOC Datasheet
■The Uplynx XS8001-T-NG48NRY is one of ESMTs family of wireless SOCs designed for ultra-low-power wireless IoT applications.
■The Uplynx XS8001-T-NG48NRY monolithically integrates the Sigfox protocol stack with best-in-class sub-GHz RF performance.
■The Uplynx XS8001-T-NG48NRY's built-in 10-bit ADC,analogue comparators and GPIOs are available for access via an AT command set over UART interface.
■The Uplynx XS8001-T-NG48NRY is the most cost effective,smallest,and easy-to-design SOC solution for IoT applications where wireless data uplink is enabled via the Sigfox network.
●Product Features
■2.1 Communication Unit
▲868(863~870)MHz,870-875.6MHz,915(902-928)MHz ISM band support
▲State-of-the-art integrated RF front-end with high-performance synthesizer and integrated power amplifier
▲Programmable PA output power up to 22dBm
▲Sigfox™ uplink compliant RF signaling via tight Power Amplifier profiling and phase shaping
▲Sigfox Verified™ reference circuit for RCZ1,2,3,4 (5,6) AT command set
▲Build in channel power detector for LBT implementation
■2.2 Application Processing Unit
▲ANDES 32-bit AndesCore N801-S processor
▲Energy-Efficient
▲Programmable up to 60MHz
▲Up to 128kB embedded FLASH
▲8kB Instruction RAM for time-critical tasks or data memory extension
▲Up to 24kB Data RAM with retention
▲Supports 10-channel Direct Memory Access (DMA)
▲AES-128 ciphering and deciphering hardware engine with CCM support
▲Arithmetic coding engine for data compression/decompression
■2.3 Sensor/Display/Peripheral Unit
▲GPIOs for general peripheral support
▲SPI,I2C,UART,
▲2x 32-bits PWM Engines with two channels each
▲4-channel 10-bit on-chip ADC for external analog sources
▲Embedded on-chip monolithic temperature sensor
▲Low-power analog comparator with wake-up support
▲Programmable supply detect alarm (AVDD) for battery monitoring
■2.4 Interrupt/Clock/Timer/Reset/Wake-up Management
▲Built-in power-on-reset (POR)
▲On-chip low-power 32kHz oscillator
▲Integrated 12MHz crystal oscillator driver,support external 24MHz TCXO
▲Fine-grain dynamic PLL frequency setting for optimal power/performance
▲Real-Time-Clock (RTC)
▲Watch-Dog Timer (WDT)
▲3x 32-bit general-purpose fast timer
▲3x 32-bit ultra-low-power timers with wake-up support
■2.5 Power/Energy Management
▲VDD=2.5V –3.5V (Sigfox verified reference design at 2.5V and 3.3V for RCZ1 and RCZ2/4 respectively)
▲Operating temperature -40°C to 85°C
▲Multiple internal LDOs for supply noise immunity and optimized performance
▲Sigfox Txmode:Typically 58mA at 14dBm output (Tx+ Sigfox AT uplink modem)
▲Integrated power management engine to optimize energy consumption
◆Normal mode:full features with clock speedup to 60MHz
◆Idle mode:Normal mode with CPU clock-gated for power-saving
◆Sleep mode:System in hibernate except SRAM and partial digital register bank in retention for fast wake-up
■2.6 Small Form-Factor
▲Available in 7mm x 7mm 48-pin QFN package
▲Compact board design with very low external component count
■2.7 Easy-to-Design
▲The Uplynx XS8001-T-NG48NRY comes with a complete set of technical documents.They include basic product briefs,datasheets,technical reference manuals as well as many application notes.
▲The Uplynx XS8001-T-NG48NRY comes with a baseboard for development and/or evaluation.
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
1/17/2018 |
|
|
Version 1.3 |
|
|
ESDS-UPLYNX-007 |
|
|
2.9 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
