Serial Peripheral Interface (SPI) SPI NAND Flash Datasheet
■SPI (Serial Peripheral Interface) NAND provides a low cost and low pin count solution to alternate SPI-NOR in high density non-volatile memory storage solution for embedded systems.
■SPI NAND is a flash memory device with SLC NAND of the standard parallel NAND. The serial electrical interface follows the industry-standard serial peripheral interface. The command sets are similar to SPI-NOR command sets. Some modifications have been made for handling NAND-specific functions. Besides, new features are added to extend applications. The SPI NAND has 8 pin counts in total, including six signal lines plus VCC and GND. The density is 2Gbit through 4Gbit.
■Each block of the serial NAND is subdivided into 64 programmable pages. Each page consists of a data storage region and a spare area. The data storage region is used to store user-programmed data and the spare area is typically used for memory management and error correction functions.
●Features
■Single-Level Cell (SLC)NAND Flash
■Operating Voltage Support
▲VCC :3.3V(3.0V to 3.6V)
■Clock Frequency
▲Up to 120MHz
■Standard,Dual and Quad SPI
▲Standard SPI: SCLK,CS#,SI,SO,WP#,HOLD#
▲Dual SPI: SCLK,CS#,SIO0,SIO1,WP#,HOLD#
▲Quad SPI: SCLK,CS#,SIO0,SIO1,SIO2,SIO3
■ECC Protection
▲8bit ECC for each 512bytes +32bytes
■Package (Pb Free and Halogen Free)
▲8-pin LGA-8(8x 6 x 0.8mm)
■OTP Protection
▲64 pages one time programmable
■Performance (Typical)
▲Page Program Time: 600us
▲Page Read Time: 70us
▲Block Erase Time: 3ms
■Operating Current
▲Read Operation Current: 25mA
▲Program Operation Current: 25mA
▲Erase Operation Current: 30mA
▲120uA maximum standby current
■Endurance
▲P/E cycles: more than 100,000/cycles
■Data Retention
▲10/years
■Temperature
▲Operating Temperature: -40℃ to+85℃
▲Storage Temperature: -65℃ to+150℃
AS5F32G04SNDA-08LIN 、 AS5F34G04SNDA-08LIN 、 AS5FXXXXXXXXX–XXXXX |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
LGA-8;LGA |
|
English Chinese Chinese and English Japanese |
|
August, 2022 |
|
Rev 1.0 |
|
|
|
1.9 MB |
- +1 Like
- Add to Favorites
Recommend
- Alliance Memory Announces ISO 9001:2015 Recertification
- Alliance Memory Introduces New Line of 1.8V and 3V SPI NAND Flash Memory Solutions
- Alliance Complete Automotive Temperature DRAM Portfolio, Now With Reduced Lead Times
- Alliance rounds out DDR4 SDRAM Lineup with six new 4Gb “A” die devices, which offer lower +1.2V operating voltages and higher speeds to 1600MHz in 96 and 78-Ball FBGA packages
- Alliance Announces a New Line Of 3V Multiple Input/Output Serial NOR Flash Memory Products
- Alliance Memory Now Offering Micron Parallel and Serial NOR Flash Products
- Alliance Memory Offered Discontinued Cypress Semiconductor CY62256 Low Power SRAMs With Original Part Numbers Into 2019
- Alliance‘s New 1.8V, 128Mb Multiple I/O Serial NOR Flash Memory AS25F1128MQ-70SIN and AS25F1128MQ-70WIN Combine Fast Read Performance Up To 133MHz With Fast Page Program
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.