SGM8745 6ns, 3V/5V, Single-Supply, Low Power, Rail-to-Rail I/O Comparator

2022-09-23
■GENERAL DESCRIPTION:
●The SGM8745 is a dual, high speed, low power comparator, which features a fast 6ns propagation delay. The device is optimized for low voltage operation on 3V or 5V supply, and consumes only 2.6mA supply current.
●The SGM8745 supports rail-to-rail input and output operation. The input common mode voltage range is from -0.1V to (+V-S) + 0.1V, and the output voltage swing is within 0.2V of the rails without external pull-up or pull-down resistor. The device can be compatible with CMOS and TTL logics. Any input or output pin has a continuous short-circuit protection to both power supply rails. The SGM8745 has an internal hysteresis for reducing comparator sensitivity to noise, even when the input signals move slowly.
●The SGM8745 is available in Green SOIC-8 and MSOP-8 packages. It is rated over the -40℃ to +85℃ temperature range.
■FEATURES:
●High Speed: 6ns Propagation Delay (100mV Overdrive)
●Low Supply Current: 2.6mA (TYP) at V-S = 3V
●Low Offset Voltage: 0.8mV (TYP)
●Rail-to-Rail Input and Output
●Supply Voltage Range: 2.7V to 5.5V
●Optimized for 3V and 5V Applications
●Output Swing to within 195mV from Rails with 4mA Output Current
●Supports CMOS or TTL Logic
●Internal Hysteresis for Reducing Comparator Sensitivity to Noise
●-40℃ to +85℃ Operating Temperature Range
●Available in Green SOIC-8 and MSOP-8 Packages

SGMICRO

SGM8745SGM8745YMS8G/TRSGM8745YS8G/TR

More

Part#

Single-Supply, Low Power, Rail-to-Rail I/O Comparatordual, high speed, low power comparator

More

Portable Powered Equipment ]Battery-Powered Equipment ]Mobile Phones ]Zero-Crossing Detectors ]Threshold Detectors ]Line Receiver Units ]

More

Datasheet

More

More

Please see the document for details

More

More

SOIC-8;MSOP-8

English Chinese Chinese and English Japanese

AUGUST 2022

REV. A. 1

1 MB

- The full preview is over. If you want to read the whole 13 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: