DEI3182A ARINC 429 DIFFERENTIAL LINE DRIVE

2022-09-20
Description The DEI3182A is a complete differential line driver IC. When Data A = Data B or Sync or Clock Signal is low, the driver forces the output to a Voltage Null level (0V ± 250 mV). Designed to address the ARINC 429 Standard, the DEI3182A has output rise and fall times that can be adjusted by the selection of an external capacitor (CA or CB) and an output voltage range adjustable through an externally applied VREF signal. All logic inputs and sync control inputs are TTL/CMOS compatible. The device is constructed on a monolithic IC using a junction-isolated bipolar process. SiCr resistors in the internal bias circuitry provide for stable bias currents and a tighter tolerance of output impedance. The DEI3182A is available in 16-lead ceramic side-brazed DIP and can be ordered with MIL-STD-883B burn-in screening.
●Functional Description
■The device contains three main functional blocks. The first block is a digital section used to decode the ARINC Clock, Synchronization, and Data inputs as shown in Block Diagram. This block takes these inputs and channels the data to the charge pump circuits. The logical relationship for these pins is presented in Table 1.
●FEATURES • Adjustable rise and fall times • Low supply current • Capable of driving 30 nF || 400W • Digitally selectable 12.5 or 100 kbit/sec data rate • Adjustable output voltages swing • Output over-voltage protected • Short circuit tolerant • TTL and CMOS compatible inputs • MIL-STD-883B burn-in screening available • Package Options:16L SB DIP, 16L CERDIP, 28L CLCC • Direct replacement for Fairchild/Raytheon RM3182A

Device Engineering

DEI3182ADEI3182A-DMSDEI3182A-DMBDEI3182A-CMSDEI3182A-CMBDEI3182A-EMSDEI3182A-EMB

More

Part#

DIFFERENTIAL LINE DRIVE

More

More

Datasheet

More

More

Please see the document for details

More

More

16-Lead Side-braze Ceramic DIP;16-Lead CERDIP;28 Lead Ceramic LCC

English Chinese Chinese and English Japanese

10/16/2020

Rev E

DS-MW-03182-01

779 KB

- The full preview is over. If you want to read the whole 10 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: