OPL2500 ULTRA-LOW POWER 2.4GHZ WI-FI +BLUETOOTH SMART SOC DataSheet

2022-09-02
●GENERAL DESCRIPTION
■The OPL2500 SoC features a fully integrated 2.4GHz radio transceiver and baseband processor for Wi-Fi 802.11b/g/n/ax and Bluetooth® Smart applications. The SoC can be used as a standalone application-specific communication processor or as a wireless data link in hosted MCU systems where ultra-low power iscritical. The OPL2500 supports flexible memory architecture for storing profiles, stacks and custom application codes, and can be updated using Over-The-Air (OTA) technology. Qualified Bluetooth Smart protocol stack and Wi-Fi TCP/IP stack are stored in a dedicated ROM. The OPL2500 is equipped with dual processors, ARM® Cortex®-M0 and M3, for handling different processes. All software runs on the ARM® Cortex®-M0 processor while more intensive application-specific activities run on the ARM® Cortex®-M3 processor. The OPL2500 can be connected to an external MCU through SPI, I²C or UART interfaces and sensors or other devices through GPIOs. The transceiver interfaces directly to the antenna and is fully compliant with the Wi-Fi 802.11b/g/n/ax and Bluetooth 5.2 BLE standards. With integrated antenna switch, RF balun, power amplifier (PA) and low noise amplifier (LNA), OPL2500 allows Wi-Fi and Bluetooth Smart applications with minimal PCB design area and external component requirement.

Opulinks

OPL2500OPL2500A0

More

Part#

ULTRA-LOW POWER 2.4GHZ WI-FI +BLUETOOTH SMART SOCSOC

More

More

Datasheet

More

More

Please see the document for details

More

More

QFN

English Chinese Chinese and English Japanese

2022/07/20

Version 1.2

2.1 MB

- The full preview is over. If you want to read the whole 49 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: