RX671 Group Renesas Starter Kit+ for RX671 Tutorial Manual For CS+
■Purpose
▲This RSK+ is an evaluation tool for Renesas microcontrollers. This manual describes how to get the RSK+tutorial started, and basic debugging operations.
■Features
▲This RSK+ provides an evaluation of the following features:
◆Renesas microcontroller programming
◆User code debugging
◆User circuitry such as switches, LEDs and a potentiometer Through the provided set of sample applications
▲The RSK+ board contains all the circuitry required for microcontroller operation.
●Introduction
■This manual is designed to answer, in tutorial form, the most common questions asked about using a Renesas Starter Kit+ (RSK+). The tutorials help explain the following:
▲How do I compile, link, download and run a simple program on the RSK+?
▲How do I build an embedded application?
▲How do I use Renesas tools?
■The project generator will create a tutorial project with three selectable build configurations:
▲‘DefaultBuild’ is a project with debug support and optimisation level set to two.
▲‘Debug’ is a project built with the debugger support included. Optimisation level is set to zero.
▲‘Release’ is a project with optimised compile options (level two) and no outputs debugging information options selected, producing code suitable for release in a product.
■Files referred to in this manual are installed using the project generator as you work through the tutorials. The tutorial examples in this manual assume that installation procedures described in the RSK+ Quick Start Guide have been completed. Please refer to the Quick Start Guide for details of preparing the configuration.
■Due to the project generator, it is possible that line numbers for source code illustrated in this document do not match exactly with that in the actual source files. It is also possible that the source address of instructions illustrated in this manual differ from those in user code compiled from the same source. These differences are minor, and do not affect the functionality of the sample code nor the validity of this manual.
■CS+ is an integrated development tool that allows the user to write, compile, program and debug a software project on the RX, RL78 and RH850 family of Renesas microcontrollers. CS+ will have been installed during the installation of the software support for the Renesas Starter Kit+ product. This manual will describe the stages required to create and debug the supplied tutorial code.
|
RX Family 、 RX600 Series 、 RX600 、 RX671 |
|
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
May.10.21 |
|
|
Rev. 1.00 |
|
|
R20UT4880EG0100 |
|
|
2 MB |
- +1 Like
- Add to Favorites
Recommend
- The Past and the Future of Renesas RX Family Software
- Renesas 32-bit RX at the Closing of 10th Anniversary: RX roadmap continues to expand
- Renesas Ships 1 Billionth Device From RX Family of 32-bit Microcontrollers
- Bringing DSPs closer to you! Realizing Digital Filters with the latest low-end RX140 Microcontroller of the Renesas RX Family!
- Renesas RX Becomes World‘s First General-Purpose MCU to Obtain CMVP Level 3 Certification Under NIST FIPS 140-2
- Renesas DSP Solution on Renesas Lab on the Cloud, Input Analog Signals Directly From A Signal Generator To The Rx231 Microcontroller Evaluation Board
- Renesas‘ RX Security Solutions Provide A Unique Hardware Technology, Implementing Robust IoT Security Easily
- Renesas RX family has been very much successful in both the consumer and industrial application
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
