ADL500 INVERTER FOR ELEVATOR
2022-08-22
●In the last decade the elevators have been under a tremendous evolution from the technology standpoint like never before. Safety, comfort travel, efficiency, reliability, remote access combined with the use of smartphones and tablets are the major changes that we daily experience versus the old generation systems.
●Gefran has developed the new ADL500 inverter series specific for elevators EN81-20 / EN81-50 certified.
●The series is composed of three lines ADL550, ADL530 and ADL510 designed to answer the requirements of high rise, medium rise and low rise buildings, without to forget the big market of the modernization.
■ADL510: designed to be simple and easy to install in case of asynchronous motors typical of low-rise buildings or modernization both in open and close loop.
■ADL530: designed to control both geared and gearless motor control integrated Universal encoder (EnDat, SinCos, BiSS and Digital Incremental) and integrated CAN port for communication by CAN Open 301 and CAN Open Lift 417 are ready to use.
■ADL550: with the advanced safety functions, Safe Torque Off SIL3 (Phase contactor-less), Safe Brake Test (SBT) to check the motor brakes effectiveness, and the Electronic Brake Control (EBC) SIL3 that replaces the electro-mechanical brakes contactors by internal electronics (Brake contactor-less). Elevator Positioning Control (EPC) that allows to have a better comfort with the direct approach and precise floor levelling even for very high demanding elevators. Stand-by function, where the power part of the drive is shut off to eliminate the energy consumption during the idle state.
■ADL550-ICS, the Integrated Control System creating one single environment between the inverter and the control card, optimizing the commissioning and the start-up of the electronic parts of the elevator.
●Gefran has developed the new ADL500 inverter series specific for elevators EN81-20 / EN81-50 certified.
●The series is composed of three lines ADL550, ADL530 and ADL510 designed to answer the requirements of high rise, medium rise and low rise buildings, without to forget the big market of the modernization.
■ADL510: designed to be simple and easy to install in case of asynchronous motors typical of low-rise buildings or modernization both in open and close loop.
■ADL530: designed to control both geared and gearless motor control integrated Universal encoder (EnDat, SinCos, BiSS and Digital Incremental) and integrated CAN port for communication by CAN Open 301 and CAN Open Lift 417 are ready to use.
■ADL550: with the advanced safety functions, Safe Torque Off SIL3 (Phase contactor-less), Safe Brake Test (SBT) to check the motor brakes effectiveness, and the Electronic Brake Control (EBC) SIL3 that replaces the electro-mechanical brakes contactors by internal electronics (Brake contactor-less). Elevator Positioning Control (EPC) that allows to have a better comfort with the direct approach and precise floor levelling even for very high demanding elevators. Stand-by function, where the power part of the drive is shut off to eliminate the energy consumption during the idle state.
■ADL550-ICS, the Integrated Control System creating one single environment between the inverter and the control card, optimizing the commissioning and the start-up of the electronic parts of the elevator.
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
