DrakaEliteTM High Temperature Acrylate BendBright-Elite:Ultra bend insensitive SMF – Guaranteed for very low radius and high temperatures (up to 150°C)
■BendBright-Elite further extends these technologies to enhance the bending performance at very low radii at all wavelengths. With bend losses less than 0.15 dB for 1 turn at 5 mm at 1550 nm, Draka’s BendBright-Elite offers unmatched value to customers that need to reduce the size of their components.Thanks to its high proof test stress level and its extreme insensitivity to optical bending loss, Draka’s BendBright-Elite is able to endure repeated very tight bending. In addition the high temperatureacrylate option offer an effective protection of the fiber during installation and operation for temperatures up to 150°C.
■While offering unparalleled performance, Draka’s BendBright-Elite is still based on conventional technology. It is an all solid silica fibers, without voids or other hole structures. It can be easily fusion spliced by any commercial splicer and requires no specific connectorization procedure. Because it’s manufactured using Draka’s Plasma Chemical Vapor Deposition process, BendBright-Elite has perfect control of all its characteristics both along the length of the fiber and in any radial direction.
[ telecom ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2010/11/10 |
|
|
|
|
|
291 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.