Series AP directly operated proportional valves
2022-08-05
●2/2-way proportional valves, NC
●Sizes: 16 - 22 mm
●Series AP directly operated 2/2-way proportional solenoid valves, NC, with nominal diameters range from 0.8 to 2.4 mm, can be used where an open loop flow control is required, with gas mixtures, to control free flows or blows, or emptying chambers using vacuum.
●Series AP proportional valves have been manufactured to optimize and reduce friction and stick-slip effects. The output flow is proportional to the control signal. As they can work also in vacuum, a minimum working pressure is not required.
●PWM or current operation
●Open loop flow control
●Also suitable for use with vacuum
●Several versions available:
■with body in PVDF (size 16mm only),
■with rear flanged bodies
■with lower flanged bodies,
■suitable for use with oxygen
■Seals in FKM, NBR and EPDM
●Sizes: 16 - 22 mm
●Series AP directly operated 2/2-way proportional solenoid valves, NC, with nominal diameters range from 0.8 to 2.4 mm, can be used where an open loop flow control is required, with gas mixtures, to control free flows or blows, or emptying chambers using vacuum.
●Series AP proportional valves have been manufactured to optimize and reduce friction and stick-slip effects. The output flow is proportional to the control signal. As they can work also in vacuum, a minimum working pressure is not required.
●PWM or current operation
●Open loop flow control
●Also suitable for use with vacuum
●Several versions available:
■with body in PVDF (size 16mm only),
■with rear flanged bodies
■with lower flanged bodies,
■suitable for use with oxygen
■Seals in FKM, NBR and EPDM
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.