SGM621 Low Power, Low Noise, Rail-to-Rail Output, Instrumentation Amplifier
●The SGM621 is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10000 with one external resistor. The device works well in battery-powered applications due to the low power consumption of 1.3mA typical quiescent current. The SGM621 provides SOIC-8 and MSOP-8 packages which are much smaller than discrete classical-three-OPAs circuits.
●The SGM621 provides 120ppm (MAX) non-linearity and 150μV (MAX) low input offset voltage. The device also features low noise, low bias current and low power. The combination of these characteristics makes it a good choice for applications requiring excellent DC performance.
●The SGM621 offers 6nV/√Hz low input voltage noise, 300fA/√Hz input current noise at 1kHz, and 0.4μV-P-P in the 0.1Hz to 10Hz band. It is suitable for pre-amplifier applications. The 10μs settling time to 0.01% makes SGM621 appropriate for multiplexed applications.
●The SGM621 is available in Green SOIC-8 and MSOP-8 packages. It is specified over the extended -40℃ to +125℃ temperature range.
■FEATURES:
●Single External Resistor Gain Set (Set Gain from 1 to 10000)
●Input Offset Voltage: 150μV (MAX)
●Input Bias Current: 15nA (TYP)
●Common Mode Rejection Ratio: 105dB (TYP) (G = 10)
●Input Voltage Noise: 6nV/√Hz at 1kHz
●0.1Hz to 10Hz Voltage Noise: 0.4μV-P-P
●Bandwidth: 140kHz (G = 100)
●Settling Time to 0.01%: 10μs (G = 100)
●Rail-to-Rail Output
●Support Single or Dual Power Supplies: 4.6V to 36V or ±2.3V to ±18V
●Low Power Supply Current: 1.3mA (TYP)
●-40℃ to +125℃ Operating Temperature Range
●Available in Green SOIC-8 and MSOP-8 Packages
Low Power, Low Noise, Rail-to-Rail Output, Instrumentation Amplifier 、 high accuracy, high voltage instrumentation amplifier |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SOIC-8;MSOP-8 |
|
English Chinese Chinese and English Japanese |
|
JUNE 2022 |
|
REV. A. 2 |
|
|
|
1.7 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.