HORNETPRO MAINS Remote Control Quick Start
▲NOTE: Systems come pre-paired. Pairing instructions only need to be followed for additional transmitters.
▲With this system, you can pair together any individual transmitter switch, with a receiver relay output switch. Without opening either enclosure...
▲Briefly (for less than 1 second) place a magnet next to the top left of the receiver as shown, and then remove it.
▲The receiver will buzz once(One buzz means the receiver unit is ready to allocate a transmitter to relay switch 1).
▲Press the switch on the transmitter which you wish to pair.
▲The receiver will buzz twice to confirm pairing.
▲Repeat for any additional transmitter switches.
▲NOTE: Each receiver has a maximum memory for up to 28 pairings, these can be from any switches on any transmitters!
▲To select relay outputs 2,2,4, repeat step 3 above and count the number of buzzes. 2 buzzes for relay 2, 3 for 3 etc.
|
Receiver 、 Transmitter 、 key fob transmitters 、 Remote Control |
|
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2021/11/12 |
|
|
|
|
|
QS-HORNETPRO-MAINS-1 |
|
|
1.3 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
