EE610 Low Differential Pressure Sensor
▲Measurement Performance
■ The EE610 offers ± 0 5 Pa accuracy over the entire measurement range. For the versions with analogue outputs, the measuring ranges ± 25 / ± 50 / ± 100 Pa and 0...100 Pa (±0.1/±0.2/±0 4and 0 ..0.4 inch water column) are selectable with DIP switches. The piezo-resisth/e, no flow-through pressure sensing element stands for outstanding long term stability.
▲Analogue and Digital Outputs
■ The measured data is available on the analogue voltage and current outputs or on the RS485 interface with Modbus RTU or BACnet MS/TP protocol.
▲Functional and Robust
■ The IP65 / NEMA4 enclosure minimizes installation costs. External mounting holes allow installation with closed cover, the electronics are thus protected against construction site damage and pollution.
▲Configurable and Adjustable
■ The setup and adjustment can be easily performed with DIP-switches and push buttons on the electronics board (EE610 with analogue outputs) or with an optional adapter and the free EE-PCS configuration software (EE610 with RS485 interface). The setup includes bidirectional or unidirectional pressure range, output signal, response time, display units and backlight A zero and span point adjustment can be easily performed with push buttons on the electronics board.
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2020/1/9 |
|
|
v1.2 |
|
|
|
|
|
1.1 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
