SC16C752B 5 V, 2.2 V and 2.5 V dual UART, 5Mbit/s (max.), with 64-byte FIFOs
●The UART transmits data, sent to it over the peripheral 8-bit bus, on the TXn signal and receives characters on the RXn signal. Characters can be programmed to be 5 bits, 6 bits, 7 bits, or 8 bits. The UART has a 64-byte receive FIFO and transmit FIFO and can be programmed to interrupt at different trigger levels. The UART generates its own desired baud rate based upon a programmable divisor and its input clock. It can transmit even, odd, or no parity and 1, 1.5, or 2 stop bits. The receiver can detect break, idle, or framing errors, FIFO overflow, and parity errors.The transmitter can detect FIFO underflow. The UART also contains a software interface for modem control operations, and has software flow control and hardware flow control capabilities.
●The SC16C752B is available in plastic LQFP48 and HVQFN32 packages.
|
|
Solutions |
|
|
|
Please see the document for details |
|
|
|
|
|
LQFP48;HVQFN32 |
|
English Chinese Chinese and English Japanese |
|
Apr 9, 2022 |
|
|
|
|
|
77 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.