POE60S-4AF Power over Ethernet and Data Extender User Manual
●Using standard RJ45 connecting Ethernet cables the POE60S-1AF takes its power from an Ultra or Mega PoE midspan(75W or greater).The output is converted to be IEEE802.3af compatible 15.4W per port.The device can also act as a switchdata repeater by itself.It has an optional 75W DC power adapter,the PSC75U-560 which can power all four ports at 15.4W per port.
●This extender makes espanding a network easy.The POE60S-4AF makes it possible to add an additional 4 security cameras 200 meters from a network switch.The fi rst Ethernet cable not exceeding 100 meters should be laid from the switch to a midpoint where the POE60S-1AF is connected;additional cables not exceeding 100 meters each should run from the extender to the security cameras.As this device is built with plug-and-play technology there is no additional software or hardware installation required.Upon powering up,the device will work automatically taking the necessary power from the midspan and relaying it on to the IEEE802.3af compatible device.
●Compatible IEEE802.3af devices include but are not limited to Security Cameras,IP Telephones,and wireless network and access controllers.
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2010/4/15 |
|
|
|
|
|
507 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.