AH413 Latch Type Hall Sensor
■When the S pole of magnet faces the mark surface of the sensor and is closed to sensor（B≥ Bop）, the sensor outputs low level; When the N pole faces the mark surface and is closed to sensor（B≤Brp），the sensor outputs high level. When the magnet if far away with the sensor (B=0), the output status of the sensor is latched and keep constant. In order to change the output status, the applied magnetic field must be opposite polarity.
●Features
■Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V;
■Operating temperature range: -55℃ ~ 150℃;
■Rated output current(sink) : 25 mA, the maximum output current(sink): 50 mA
■Switch response time is about 1μs, the operating frequency DC ~ 100 kHz;
■Small temperature drift between operating point and release point;
■No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety;
■Products meet the EU RoHS instruction 2011/65 / EU and REACH regulations 1907/2006 / EU requirements
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
TO-92UA;TO-92S |
|
|
English Chinese Chinese and English Japanese |
|
|
2017/8/14 |
|
|
|
|
|
|
|
|
652 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
