AD590 Temperature Sensors
■The AD590 is a 2-terminal integrated circuit temperature transducer that produces an output current proportional to absolute temperature. For supply volta ges between 4 V and 30 V, the device acts as a high impedance, constant current regulator passing 1 μA/K. Laser trimming of the chip's thin-film resistors is used to calibrate the device to 298.2 μA output at 298.2 K ( 25°C).
■The AD590 should be used in any temperature-sensing application below 150°C in which conventional electrical temperature sensors are currently employed. The inherent low cost of a monolithic integrated circuit combined with the elimination of support circuitry makes the AD590 an attractive alternative for many temperature measurement situations. Linearizati on circuitry, preci sion voltage amp lifiers, resistance measuring circuitry, and cold junction compensation are not needed in applying the AD590.
■In addition to temperature measurement, applications include temperature compensation or correction of discrete components, biasing proportional to absolute tempera ture, flow rate measurement , level detection of fluids and anemometry. The AD590 is available in chip form, making it suitable for hybrid circuits and fast temperature measurements in prote cted environments.
■The AD590 is particularly useful in remote sensing appl ications . The device is insensitive to voltage drops over long lines due to its high imped ance current output. Any well-insulated twisted pair is sufficient for operation at hundreds of feet from the receiving circuitry. The output characteristics also make the AD590 easy to multiplex: the current can be switched by a CMOS multiplexer, or the supply voltage can be switched by a logic gate output.
●FEATURES
■Linear current output: 1 μA/K
■Wide temperature range: −55°C to +150°C
■Probe-compatible ceramic sensor package
■2-terminal device: voltage in/current out
■Laser trimmed to ±0.5°C calibration accuracy (AD590M)
■Excellent linearity: ±0.3°C over full range (AD590M)
■Wide power supply range: 4 V to 30 V
■Sensor isolation from case
■Low cost
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
0517 |
|
|
|
M0287 |
|
566 KB |
- +1 Like
- Add to Favorites
Recommend
- How Are Stackable Header Pins Useful in Electronics and Engineering?
- Sunstar Engineering Americas Wins the Mazda Excellence Supplier Award
- Mibbo Provides Reliable and Sustainable Power Solutions for Night Scene Engineering
- Function of 4G Cellular Modem in Hydraulic Engineering
- Eclipse Global Connectivity, Smiths Interconnect and ST Engineering IDirect Collaborate to Deliver a New Airborne ISR SATCOM Capability
- Keysight and Singapore‘s Quantum Engineering Programme to Accelerate Research, Development and Education in Quantum Technologies
- Rogers Announces Acquisition of Silicone Engineering
- Revolutionizing Space Component Engineering: Smiths Interconnect‘s Space Qualification and Rapid Engineering Laboratory
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.