SD3031 REAL-TIME CLOCK IC
●The SD3031 is a CMOS type real-time clock with a built-in crystal and an integrated temperature-compensated crystal oscillator(TCXO),which is connected to the CPU via 2-wires and capable of serial transmission of clock and calendar data to the CPU.
●The SD3031 has dual power supply system.When the primary power supply goes down to an assigned value or resumes from low power,the system can switch between the primary power supply and battery automatically.
●The SD3031 can generates various periodic interrupt clock pulses lasting for long period,and three alarm interrupts can be made by year,month,date,days of the week,hours,and minutes.,seconds. It also provides a selectable 4096Hz~1/16Hz clock output for an external MCU.The product incorporates a time trimming circuit that adjusts the clock with higher precision by adjusting any errors in crystal oscillator frequencies.A 70-bytes general SRAM is implemented in the SD3031.
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SOP |
|
English Chinese Chinese and English Japanese |
|
2021/12/16 |
|
|
|
|
|
632 KB |
- +1 Like
- Add to Favorites
Recommend
- Coherent Introduces Wavemaker® and Waveshaper® Optical Solutions For Multi-Wavelength Transmissions
- TAD30/TSD30 Series AC/DC Power Supply Has 30 Watts Output Power and Low Leakage Current under 100μA
- Coherent Introduces New WaveShaper Instruments WaveShaper® 1000A, 4000A and 500B for the U- and Super C-Bands
- Coherent Introduces WaveShaper and WaveAnalyzer for Operation Across the Super C-Band
- Coherent Introduces Wavemaker and Waveshaper Instruments to Lower the Cost of Testing Next-Generation Technology for Optical Networks
- II-VI‘s POLS and WaveShaper® Product Lines Honored by Lightwave Innovations Reviews
- Maswell New WiFi mmWave Horn Antenna AN.Horn.WF.mmwave.50.77.WR15 with the Frequency Range of 50~77GHz and a Typical Gain of 15dBi
- II-VI Extends WaveShaper Programmable Optical Processor and Filter Product Lines for Operation in the C+L Band
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.