AOD-200 GY WIRELESS DUAL TECHNOLOGY OUTDOOR MOTION DETECTOR
●The AOD–200 detector is characterized by a detection angle as wide as 100 degrees and a range of more than 15 meters. The look down zone is protected, so any intruder's attempt to creep up in order to damage or tear the device off will be detected. In addition, the AOD–200 detector series software has been designed so as to prevent triggering false alarms by the movement of small pets. The AOD–200 detector is provided with a dusk sensor which enables it to be used also in alarm systems with home automation, without having to install any twilight detectors. The detector can also interface with the KNX system via a control panel of the INTEGRA series. Thus, the AOD–200 functionality allows you to easily and conveniently control, for example, the roller shutters, exterior lighting of the building, garage door or entrance gate, and also select the moment of operation through fine sensitivity adjustment. A very convenient feature is configuration of the detector sensitivity from the DLOADX program level.
●The AOD–200 detector is designed for mounting directly on a flat surface. If the detector is to be turned vertically or tilted horizontally, you can use special angle–type or ball–joint type brackets from the BRACKET C set (white) or BRACKET C GY set (gray).
●The AOD–200 detector is available in two color versions: white (AOD–200) and gray (AOD–200 GY).
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2022/4/27 |
|
|
|
|
|
116 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.