T2750 Eurotherm PAC Installation and Wiring Instructions
▲The instrument consists of a base unit, into which a number of terminal units are fitted, each of which has an associated module plugged into it. The base unit is fitted with one or two input/output controller (IOC) modules and up to 16 input or output (I/O) modules.
▲The IOC module contains system configuration and communications support. The integral SD card contains strategy and database information, so if it becomes necessary to replace an IOC, moving the SD card from the old module to the new one allows the new module to be fitted with minimum disturbance to the system.
▲The terminal units, which are specific to module type provide connectors for the termination of user wiring. The terminal units also provide interconnections between I/O modules and the IOC. The I/O Modules, which clip into the terminal units, are dedicated to specific analogue or digital, inputs or outputs. ▲A suitable Power Supply is the 2750P, available as 1.3, 2.1, 5.0, or 10.0 amp units. Refer to the User Guide (HA030047) for power consumption figures.
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
Aug 2017 |
|
Issue 11 |
|
HA030707;(CN35788) |
|
2.5 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.