AX01R***VANB Board to Board Connectors
●THE COPLANARITY OF CONTACT AND HOLD DOWN SHALL BE 0.1 mm MAXIMUM.
●PRODUCTION LOT NUMBER IS MARKED ON THE INSULATER.
●THE DIMENSION BETWEEN THE SUBSTRATE IS DEPEND ON COMBINATIONS OF CONNECTOR.REFER TO "JACS-11221"
●IT IS RECOMMENDED TO USE AT LEAST 2 SPACERS MOUNTED DIAGONALLY ABOUT THE CONNECTOR TO FIX THE BOARDS. THE SPACERS SHOULD BE THE SAME HEIGHT AS THE DIMENSIONAL RANGE BETWEEN THE SUBSTRATES. IN THAT CASE, THE SPACERS SHOULD BE THE SAME HEIGHT WITHIN THE DIMENSIONAL RANGE BETWEEN THE SUBSTRATES.
●THE OF THE INSULATOR IS DIFFERENT DEPENDING ON THE NUMBER OF CORES OF THE CONNECTOR.
●REFER TO "JACS-11221" FOR THE DEVELOPMENT STATUS OF SPECIFIC CONNECTOR OPTIONS.
|
|
Outline Dimension Drawing |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
17/SEP/2019 |
|
VER.3 |
|
SJ120866 |
|
477 KB |
- +1 Like
- Add to Favorites
Recommend
- Interpreting The ‘Domestic Replacement‘ of Electronic Components
- CEO of Slkor and Kinghelm Sang Shiqiang‘s Interpretation of the “Domestic Substitution“ of the Electronic Information Industry
- ept One27® SMT PCB Connectors with a Pitch of 1.27mm is Suitable for Board-to-board Applications ∣ video
- Kyocera Launches 5814 Series 0.3mm Pitch Board-to-Board Connector, with a Stacking Height of 0.6mm and Width of 1.5mm
- Testing and Common Troubleshooting of Board-to-Board PCB Connectors
- Kinghelm KH-XH-2A-Z: Board-to-Board Connector Meeting Various Industry Needs
- Zero8 SMT-Connector Now Available in Mid-Profile and Low-Profile Types, Allowing Board-to-Board Distances of 6.00 to 20.00 mm
- Application Areas of Board-to-Board Connector Terminals
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.