SERIES 6000 Microprocessor-Based Temperature Controller Operator's Manual
The OMEGA® Model 6000 Microprocessor-Based Temperature Controller provides the latest in neating and cooling control. A large dual 4 digit display shows process and set point temperature at a glance.
Three mode PID (proportional,integral and derivative) action eliminates offset as cooling and heating requirements change in the process, provides fast output response to rate of change, and reduces temperature overshoot and undershoot. Heating and cooling outputs can be either relay, 4-20mA, triac or 20V dc pulsed, in combination.
The touch-key operation of the Model 6000 Controller eliminates all external knobs and protruding switches. Parameters are entered easily and can be locked in to prevent unauthorized tampering.
The Model 6000 Controller also incorporates: software linearization and stabilized sensor input; °F to ℃ conversion; alarms that can be energized by temperature rise or fall and be selectable as process or deviation type; and a program restart circuit that eliminates program lockup due to transient voltage spikes or line voltage "brownout."
Program automatically restarts within 20 milliseconds after condition passes. The Model 6000 Controller is available with thermocouple types J, K, T, or RTD inputs. RTD inputs are available in two models: P1 for 1° resolution and P2 for 0.1° resolution. RTD models also feature, as standard, a recorder output: P1 has 1 mV/°F output (1.8 mV/°C); P2 has 10mV/°F output (18 mV/°C).
●FEATURES
■ Dual 4 digit display
■ Heating and cooling outputs
■ Microprocessor-based
■ Dual process or deviation alarms
■ Easy touch-key setup
■ Compact ¼ DIN case
■ Only 3⁵⁄₈'' deep
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
016 |
|
|
|
M150 |
|
607 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.