R&S®SMB100A Microwave Signal Generator Product Brochure
●Benefits and key features
■All purpose signal source
▲Wide frequency range from 100 kHz to 12.75/20/31.8/40 GHz covering the main frequency bands for microwave applications
▲Frequency extension from 50 GHz to 170 GHz in combination with the R&S®SMZ frequency multiplier
▲All important analog modulations with AM,FM/φM and pulse modulation supported
▲Support of R&S®NRP Zxx power sensors
▲Reverse power protection for high operational reliability (optionally available for the 12.75 GHz model)
▲Intuitive user interface with graphical display of signal flow for easy operation
▲Remote control via LAN,USB and GPIB including emulation modes for legacy instruments
▲Low weight and compact design for a wide range of applications,including mobile applications
■Best signal quality in the mid range
▲Very low SSB phase noise of typ.–128 dBc at 1 GHz and typ.–108 dBc at 10 GHz carrier frequency(20 kHz carrier offset,1 Hz measurement bandwidth)
▲Optional internal low harmonic filters for the 20 GHz and 40 GHz model to lower the harmonics to less than –50 dBc for frequencies above 150 MHz
▲Innovative DDS based synthesizer concept
■High output power and wide level range
▲High power over a wide frequency range
▲Low level range down to –120 dBm (for instruments equipped with step attenuator) with no compromise in quality
▲High harmonics suppression of < –30 dBc even at high output power
■Ideal for production
▲Wear free electronic attenuator up to 12.75 GHz ensuring long life even in the case of heavy use in production
▲High level accuracy and repeatability for high production yield
▲Closed loop power control ensures highly accurate and very stable input power to the DUT irrespective of unwanted power drifts in the test setup (e.g.caused by a power amplifier in between the signal generator and the DUT)
▲Short frequency and level settling times which can be further reduced in List mode
▲Low power consumption
■Frequency extension from 50 GHz to 170 GHz
▲R&S®SMB100A signal generator (≥ 20 GHz) plus an external R&S®SMZ frequency multiplier controlled via USB
▲An internal attenuator (mechanically or electronically controlled) can be integrated into the same housing as the frequency multiplier
■Ready for aerospace and defense applications
▲Optional pulse modulator with typ.> 90 dB ON/OFF ratio and rise/fall time of typ.< 5 ns and pulse generator with minimum pulse width of 10 ns for radar system testing
▲Flexible generation of pulse trains for simulating complex pulse scenarios (optional)
▲Wide temperature range of 0 °C to +55 °C and high permissible operating altitude of 4600 m for use even under extreme conditions
▲Sanitizing of user data for secured areas
▲High quality shielding
■User defined correction of external frequency responses
■Closed loop power control
■Flexible service concept
▲Servicing on site or at a Rohde & Schwarz service center
▲Built in selftest of modules to support troubleshooting
▲Complete calibration recommended only every three years
|
|
|
|
Supplier and Product Introduction |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2019/6/14 |
|
|
Version 07.00 |
|
|
5213.8396.12 |
|
|
1.3 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
