CCTP-25-0900MZ CCT Connector Cleaning Tips
■CCT Connector Cleaning Tips are a unique technology in fiber connector end-face cleaning. Rather than a fabric-covered or foam-covered stick, CCTs are molded cleaning tips that trap contamination and wick cleaning solvents away from connector end-faces.These tips use a molded, sintered polymer that is both porous and pliable, conforming to virtually any fiber end-face polish geometry while trapping and absorbing contaminants. Designed to be used with AFL's FCC2 Connector Cleaning Fluid for consistent and reliable connector cleaning results.
■CCT Connector Cleaning Tips offered by AFL are intended for cleaning the ferrule end-faces in adapters and sockets, as well as the exposed ferrules and termini of jumpers. CCTs are available for most commercial and Military Specification ferrule sizes.Cleaning Facts:
▲Cleaning saves time and money!
▲Dirty connectors cause a major percentage of fiber optic network failures
▲Prevention is simple – clean connectors!
▲Proper cleaning saves money by eliminating service calls caused by dirty connectors
▲Proper cleaning extends the life of connects and reduces replacement costs
▲Clean connectors maximize the performance of the network and reduce repair cost
●Features and Benefits
■Quality construction with unlimited shelf life
■Traps and holds liquid and particle contaminants in an absorbent open cell matrix ranging from 10-25 microns
■The elastic cleaning head enhances entrapment of particles and oils, while allowing the tip to conform to virtually any fiber end-face geometry (8 degree, domed polish, etc.)
■Molded sintered polymer construction assures perfect bulkhead fit and consistent performance
■No fibers, binders, adhesives or outgassing that may contaminate the connector
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
September 17, 2020 |
|
|
|
|
|
|
|
|
155 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
