SSD1327 128 x 128, 16 Gray Scale Dot Matrix OLED/PLED Segment/Common Driver with Controller
■SSD1327 is a single-chip CMOS OLED/PLED driver with controller for organic/polymer light emitting diode dot-matrix graphic display system. It consists of 128 segments and 128 commons. This IC is designed for Common Cathode type OLED/PLED panel.
■SSD1327 displays data directly from its internal 128 x 128 x 4 bits Graphic Display Data RAM (GDDRAM). Data/Commands are sent from general MCU through the hardware selectable I²C Interface, 6800-/8080-series compatible Parallel Interface or Serial Peripheral Interface.
●FEATURES
■Resolution: 128 x 128 matrix panel
■Power supply
▲V-CC = 8V ~ 18V (Panel driving power supply)
▲V-CI = 1.65V – 3.5V (MCU interface logic level & low voltage power supply)
▲V-DD = 1.65V – 2.6V (Core VDD power supply, details refer to Table 2-1)
■For matrix display
▲Segment maximum source current: 300uA
▲Common maximum sink current: 40mA
▲256 step contrast brightness current control
■Embedded 128 x 128 x 4 bit SRAM display buffer
■16 gray scale
■Pin selectable MCU Interfaces:
▲8-bit 6800/8080-series parallel interface
▲3 /4 wire Serial Peripheral Interface
▲I²C Interface
■Screen saving continuous scrolling function in both horizontal and vertical direction
■Programmable Frame Rate
■Programmable Multiplexing Ratio
■Row Re-mapping and Column Re-mapping
■On-Chip Oscillator
■Power On Reset (POR)
■Chip layout for COG , COF
■Wide range of operating temperature: -40°C to 85°C
single-chip CMOS OLED/PLED driver 、 Dot Matrix OLED/PLED Segment/Common Driver |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
COG;COF |
|
English Chinese Chinese and English Japanese |
|
23-Dec-08 |
|
Rev 1.1 |
|
|
|
831 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.