DP41-B Isolated Analog Output Option OPERATION MANUAL
■Precise analog levels are generated from digital code using a 14-bit DAC chip.
■Voltage (to 10 V) is available at the same time as current (to 22 mA), but the total current drawn should not exceed 24 mA.
■Load resistance for the voltage output can be as low as 500 ohms (20 mA at 10 V out) when current output is not used.
■Loop resistance for the current output can be as high as 600 ohms (12 volts compliance) with negligible current from the voltage output.
■Both outputs are galvanically isolated from both power and measurement circuits of the meter.
■Precision calibration is applied by the meter to either the voltage output or the current output (but not to both simultaneously). When both outputs are used simultaneously, the non-calibrated output is stable but does require external adjustment if fine-trimming is required.
■Independent, 14-bit resolution OuTput SCale and OFfset (OT.SC.OF) can convert a wide range of meter readings to the desired current or voltage output span.
■The output resolution permits good accuracy for turndown ratios (offset/span) as high as 100:1.
■50° to 104°F (10° to 40°C) accuracy within 0.1% after installation calibration.
■10% to 90% step response time is 6 milliseconds (plus filter delay, if any, programmed for the analog output).
■Configurable so that output will track the PEAK or VALLEY measurement.
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
0802 |
|
|
|
|
|
M2548 |
|
|
129 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
