Adaptive Fiber Test Heads : OTU-8000 Optical Test Unit
With the OTU-8000 installed at the central office, providers can test hundreds of live passive optical networks (PONs), regardless of the split ratio. It can accelerate PON installations when setting up new customers and troubleshooting by enabling technicians to sectionalize the network to determine the cause of a fault.
Organizations concerned with network security issues can use the OTU-8000 to detect and locate fiber tapping after only a few tenths of a decibel are inserted.
●Key Features
■Large range of OTDRs, including tuneable DWDM
■High sensitivity detection algorithm to locate low attenuation fiber tapping devices
■High accuracy trace for the whole fiber including the near end
■Dual IP communication channels
■Switch scalability up to 4464 ports with external switches
■Web-browser access
■Advanced, rapid fault location
■E-mail and SMS notifications
■Small size (2 RU) with dual power feeds, low power consumption
■Solid-state disk
■LAN-based firmware downloads
■Expandable by adding an additional test module
OTU-8000 、 E98-FP-RF 、 E98EGSM 、 E98KIT21 、 E98ACDC 、 E98X04 、 E98X08 、 E98X12 、 E98X16 、 E98X24 、 E98X36LCAPC 、 E98X48LCAPC 、 E98X288MPO* 、 E98X576MPO* 、 EOSX8000 、 E98OSX144 、 E8115D-APC 、 E81162D-APC 、 E81165D-APC 、 E8129D-APC 、 E8115C-APC 、 E81162C-APC 、 E81165C-APC 、 E81WDM-C 、 E81165B-APC 、 E8115B-APC 、 E8136B-APC 、 E98RELAYS 、 E98KIT23 、 E98KIT19 、 E9E-EXTX-24 、 E9E-EXTX-36 、 E81165C-HR-APC |
|
[ backbone ][ metro ][ access networks ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2022/2/4 |
|
|
|
|
|
208 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.