GEN-3G Ethernet-Gateway IECEx Certificate of Conformity IECEx BVS 19.0060
●STANDARDS:
■The equipment and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards.
▲IEC 60079-0:2017 Explosive atmospheres - Part 0: Equipment - General requirements
◆Edition:7.0
▲IEC 60079-11:2011 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
◆Edition:6.0
▲IEC 60079-7:2017 Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
◆Edition:5.1
▲This Certificate does not indicate compliance with safety and performance requirements other than those expressly included in the Standards listed above.
●General product information:
■The equipment is intended as a plug-in module for use in the Turck I/O system excom® in non-hazardous areas and for Zone 2. As a gateway, the device represents the interfaces between the internal communication lines of the I/O system excom® and the external Ethernet bus (Profinet, EtherNetIP or Modbus / TCP). The Ethernet interfaces with the corresponding circuit parts are designed in ignition protection type ec and the other circuit parts in ignition protection type ib. The GEN-3G plug-in module is designed exclusively for use in the MT module carrier.... (IECEx PTB 13.0040U). The module carrier MT... with its associated excom power supply units and I/O modules is used in a housing according to IEC 60079-0 and the protection class at least IP54 for use in Zone
|
|
Test Report |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2019-11-14 |
|
|
|
IECEx BVS 19.0060 |
|
129 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.