OMEGA®/HBM M Series Encapsulated Foil Strain Gages

PublishTime：2022-06-08

●M Series strain gages have been specially developed for high resistance to alternating loads at increased strain levels and high temperatures up to 300°C (572°F). They are foil strain gages with measuring grids made of a special nickel-chromium alloy. OMEGA/HBM offer this special strain gage with various geometries, measuring grid lengths and temperature response matching.
●New materials offering high strength such as fiber composites pose a major challenge for strain gages used for measurements specifically when pushing components to their mechanical limit of performance. Situations may arise where a strain gage subjected to alternating loads at increased load levels is weakened and fails earlier than the component under test. The M Series has been specially developed for high resistance to alternating loads and allows for testing of materials featuring high strength.
●All M Series strain gage types are available with different measuring grid lengths:
■1.5 mm: where space is a constraint or when highly selective measurement results are required
■ 3 mm: for inhomogeneous materials and where space is a requirement or not
■ 6 mm: for inhomogeneous materials and where space is not a requirement
●The right measuring grid length: The measuring grid length depends on the aim of measurement, since the result of a measurement with strain gages will be determined as the average of strains. In general, measuring grid lengths of 3 to 6 mm (0.06 to 0.24") generates a better result.
●Long measuring grids are recommended where there is an inhomogeneous material such as concrete or wood. A long strain gage will bridge the inhomogeneity of the work piece and return the strain underneath the measuring grid as the measurement result.
●Short measuring grids are suitable for detecting a local strain state. Therefore, they are suitable for determining strain gradients, the maximum point of notch stresses and similar stresses.

Brand of Product：	Omega Engineering
Part#：	M Series 、 LM1 、 TM1 、 TM9 、 RM8 、 XM4 、 RM9 、 1-LM11-1.5/350GE 、 1-LM11-3/350GE 、 1-LM11-6/350GE 、 1-TM11-1.5/350GE 、 1-TM11-3/350GE 、 1-TM11-6/350GE 、 1-TM91-1.5/350GE 、 1-TM91-3/350GE 、 1-TM91-6/350GE 、 1-XM41-1.5/350GE 、 1-XM41-3/350GE 、 1-XM41-6/350GE 、 1-RM81-1.5/350GE 、 1-RM81-3/350GE 、 1-RM81-6/350GE 、 1-RM91-1.5/350GE 、 1-RM91-3/350GE 、 1-RM91-6/350GE 、 1-Z70 、 1-EP310S 、 1-BCY01 、 1-RMS1 、 1-RMS1-SPRAY More Part#
Product Category：	Strain Gages More
Application：	More
Data Type：	Datasheet More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：
Language：	English Chinese Chinese and English Japanese
Date of Creation：	2016/6/20
Version Number：
Data Encoding：
Data Size：	891 KB

Data section preview(2pages)

- The full preview is over. If you want to read the whole 3 page document,please Sign in/Register -

Download

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits