TT300 ADHESIVES
●Two 1 oz Hardener Bottles (1⁄2 Filled)
●Two Plastic Funnels (35 mm Dia.)
●Two Brush Caps
● One 2 oz Bottle of Acetone
●One 2 oz Bottle of Acid Primer
●One 2 oz Bottle of Neutralizer
●One 2 oz Bottle of Resin Solvent
● Operator's Manual
●OMEGA® TT300 cement is a heat-cured, 2-part epoxy adhesive that can be used to bond polyimide-backed strain gages for strain measurement up to 200°C (392°F). Each TT300 kit includes 2 bottles of resin and hardener that are pre-measured to ensure proper mixing proportions. To use, simply pour one bottle of hardener into one bottle of resin and shake for 1 minute.
●A bottle each of hardener and resin produce approximately 3⁄4 oz of adhesive. The shelf life of the resin-hardener mixture is 6 weeks at room temperature. The shelf life of the unmixed components is indefinite, provided that the bottles are kept tightly sealed. Each TT300 kit includes 2 oz of acetone, acid primer, neutralizer, and rosin solvent for cleaning and preparing the surface, as well as 2 funnels and 2 cap brushes.
●OMEGA's SG496 and SG401 are general purpose cold-curing, 1-part glues. They are the most commonly used adhesives for strain gages. They cure in 1 minute, but require 24 hours to set. SG401 is an ethyl-based cyanoacrylate, and SG496 is a methyl-based cyanoacrylate. They have a 1-year shelf life at room temperature, but shelf life may be longer at colder temperatures. The glue temperature range is -54 to 82°C (-65 to 180°F).
|
SG496 、 SG401 、 TT300 、 SGB-36 、 SGC-36 、 SGM-36 、 BTP-1 、 BTP-2 、 BTP-3 、 BTP-4 、 BTP-5 、 BTP-6 、 BTPB-1 、 BTPB-2 、 BTPB-3 、 BTPB-4 、 BTPB-5 、 BTPB-6 、 BTPC-1 、 BTPC-2 、 BTPC-3 、 BTPC-4 、 BTPD-1 、 BTPD-2 、 BTPD-3 、 BTPE-1 、 BTPE-2 、 BTPE-3 、 RES-120 、 RES-250 、 RES-350 |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2014/11/11 |
|
|
|
|
|
|
|
|
364 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
