OM-CP-PRTEMP1000IS Intrinsically Safe Pressure and Temperature Data Logger User's Guide
■Getting Started
▲To access the COM Port for the interface cable, unscrew the key-ring end cap. Screw the end cap back onto the data logger until the o-ring cannot be seen, before deploying the data logger.
■Intrinsic Safety Approval
▲The OM-CP-PRTemp1000IS has been certified by FM Approvals as Intrinsically Safe (IS) for use in Class I, Division 1, groups A, B, C, D, and Non-incendive (NI) for use in Class I, Division 2, groups A, B, C, D Hazardous (Classified) Locations. The rating listed in the Factory Mutual approval guide is as follows: OM-CP-PRTemp1000IS. Pressure & Temperature Recorder. IS / I / 1 / ABCD T4A Ta=80 °C; NI / I / 2 / ABCD / T4A Ta=80 °C
■Pressure Sensor
▲To use the pressure sensor for gauge measurements, screw the ¼" male NPT fitting into the pipe to be measured with a 9/16"wrench. The NPT fitting can be used for absolute and submersible applications, but it is preferable to use the submersible fitting.
■O-Rings
▲O-ring maintenance is a key factor when properly caring for the
OM-CP-PRTEMP1000IS. The O-rings ensure a tight seal and prevent liquid from entering the inside of the device.
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
10/15 |
|
|
|
|
|
MQS5101 |
|
|
401 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
