RTG4™ Two-Port Large SRAM Configuration User Guide
■The RTG4® Two-Port Large SRAM configurator helps to configure a Two-Port Large SRAM instance and define how the signals are connected.
■A Two-Port Large SRAM allows write access on one port and read access on the other port (see the following figure).The core configurator cascades Large SRAM blocks automatically to create wide and deep memories by choosing the most efficient aspect ratio. It also handles the grounding of unused bits. The core configurator supports the generation of memories that have different Read and Write aspect ratios.
■Two-Port Large SRAM is synchronous with read and write operations, setting up the addresses as well as writing and reading the data. The memory write and read operations are triggered at the rising edge of the clock. The address, data, write-enable, and read-enable inputs are registered.
■An optional pipeline register is available at the read data port to improve the clock-to-out delay. When ECC is enabled, output flags are generated to indicate single-bit-correct and double-bit-detect.
■For more information about Two-Port Large SRAM, refer to the RTG4 User Guide.
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2021/11/19 |
|
|
|
|
|
DS50003071B |
|
|
542 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
