STATIC MIXERS A Technical Introduction
2022-06-01
●SELECTION GUIDE
■For each application, the designer must first determine the number of mixing sections required to achieve a complete mix. The guidelines below are based upon the Reynolds Number of your system. Also included are tables with some general application guidelines.
■Next, the designer should select a diameter and/or a construction that will give the desired mixing performance without exceeding your system's maximum allowable pressure drop (see item 3 below).
■For each application, the designer must first determine the number of mixing sections required to achieve a complete mix. The guidelines below are based upon the Reynolds Number of your system. Also included are tables with some general application guidelines.
■Next, the designer should select a diameter and/or a construction that will give the desired mixing performance without exceeding your system's maximum allowable pressure drop (see item 3 below).
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.