Ttape 1000A Thermal Reliability TEST REPORT (A18505-00)
■This report focuses on Ttape 1000A with regards to the thermal conductivity, 90° peel strength, and lap shear strength performances over the course of thermal cycling from -40°C to +125°C. The films exhibited no degradation in performance over these cycling conditions.
●Samples and Specimen
■Ttape 1075A= 3 mil thermally Conductive Pressure Sensitive Adhesive
●Exposure Methods
■Exposure condition: Samples were subjected to temperature cycling of -40°C to +125°C for up to 400 cycles. Each cycle lasts 105 min, consisting of a 15 min dwell time at -40°C, heating to +125°C at 5.5°C/min, a 15 min dwell time at +125°C, and cooling to -40°C @ 3.7°C/min.
■Equipment: Thermotron SM-32-3800
■Procedure: Samples were placed in the Thermotron for up to 400 cycles and were removed for measurement at these specific intervals, cycle # 19, 73, 125, 208, 304, and 400. A control set was tested prior to any thermal cycling and is labeled with cycle # 0. The samples were allowed to acclimate to room temperature before testing. Lap shear and 90° peel testing are destructive tests; samples cannot be re-used from one cycle test to another. Thermal conductivity measurement is a non-destructive test and samples can be re-used.
|
|
|
|
Test Report |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
4/20/2022 |
|
|
Rev.A |
|
|
A18505-00;DCO 004073 |
|
|
447 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
