OPT1500/OPT1501/ OPT1502/OPT1503/ OPT1504/OPT1505/ OPT1506/OPT1507/ OPT1508/OPT1509 Reflex Sensor for Roller Conveyor Systems
■Thanks to wenglor’s specially developed design, sensors for roller conveyor systems are mounted between the supporting rollers of a roller conveyor. Individual storage spaces in the roller conveyor system can be electrically or pneumatically switched on and off via the control logic. The sensors thus replace mechanical switching valves. A single item is removed and transported from its storage place in the case of a single discharge, while a block discharge causes all conveyed goods in a defined range to be transported on a conveyor belt at the same time. Up to 60 sensors can be electrically coupled together using a plug connector. Depending on the sensor, a magnetic valve for controlling the pneumatics may be built in.
■Safety Precautions:
■ This operating instruction is part of the product and must be kept during its entire service life.
■ Read this operating instruction carefully before using the product.
■ Installation, start-up and maintenance of this product has only to be carried out by trained personnel.
■ Tampering with or modifying the product is not permissible.
■ Protect the product against contamination during start-up.
■ Not a safety component in accordance with the EU Machinery Directive.
OPT1500 、 OPT1501 、 OPT1502 、 OPT1503 、 OPT1504 、 OPT1505 、 OPT1506 、 OPT1507 、 OPT1508 、 OPT1509 |
|
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
27.02.2018 |
|
|
|
|
|
1.2 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.