AS1603 Latch Detection High Performance Hall-Effect Sensor IC Datasheet
●Using BiCMOS process, the AS1603 is designed for high performance latch detection hall-effect application, such as automotive, industrial, electric tools, home appliances, rotor position sensing, brushless DC motor etc. The hall IC integrated an on-chip hall voltage generator for magnetic sensing, a comparator that amplifiers the hall voltage, hall sensor with dynamic offset cancellation system, an open drain output, and a Schmitt trigger to provide switching hysteresis for noise rejection, and a voltage regulator for operation with supply voltage of 2.8V to 24V.
●AC1603 is designed to respond to alternating North and South poles. White the magnetic flux density (B) is larger than operate point (B-OP), the output will be turned on (low), the output is held until the magnetic flux density (B) is lower than release point (B-RP), then turn off (high).
●The device is available in SIP-3L, TO-92S and SOT23-3L Package and is rated over the -40°C to 150°C. the package is RoHS compliant.
■Features:
●High Performance BiCMOS Process Tech.
●Input Voltage Range : 2.8V to 24V
●Resistant to physical stress
●Bipolar Latch Operation
●High Sensitivity Hall Sensor
●High Chopping Frequency
●Magnetic Sensitivity (typical)
◆B-OP=17Gauss, B-RP=-17Gauss
●Open Drain Output
●Small Solution Size
●RoHS Compliant
●SIP-3L, TO-92S and SOT23-3L Packages
●-40℃ to +150 ℃ Temperature Range
Latch Detection High Performance Hall-Effect Sensor IC 、 Magnetic Sensor IC |
|
[ Electric Tools ][ Automotive ][ Home appliances ][ Industrial ][ Rotor Position Sensing ][ Flow Meters ][ Brushless DC Motor ][ Brushless DC Fan ][ Speed Measurement ][ Revolution Counting ][ Valve ][ Solenoid Status ][ Proximity Sensing ][ Tachometers ][ Magnetic Encoder ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SIP-3L;TO-92S;SOT23-3L |
|
English Chinese Chinese and English Japanese |
|
25, March. 2015 |
|
Version 1.1 |
|
|
|
987 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.