MC1321x Accelerometer Demonstration Program Quick Start Guide
■This application note describes the basic procedures necessary to run the MC1321x Accelerometer Demonstration Program. The Accelerometer Demonstration application is programmed into the Flash of the 13213-Sensor Reference Board (SRB) from the factory. The output power of the transmitter on the SRB is set to MAX_POWER to provide maximum range.
■The Accelerometer Demonstration highlights various wireless accelerometer use cases. For more details on running the other Simple Media Access Controller (SMAC) based demonstration applications, refer to AN3231.
■For more details about the MC1321x, refer to the appropriate MC1321x, ZigBee™ - Compliant Platform - 2.4 GHz Low Power Transceiver for the IEEE® 802.15.4 Standard plus Microcontroller Data Sheet.
■For more details about the SRB, refer to the 13213EVK Evaluation Kits User’s Guide (13213EVGUG).
■A complete Accelerometer Demonstration consists of the embedded Accelerometer Demonstration code running on two SRBs. One SRB runs the PC_Radio application (PC_Radio Board) and the other SRB runs the Accelerometer application (Accelerometer Board). A PC with the Triax software installed and running is connected to the PC_Radio Board through a USB connection.
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
05/2006 |
|
|
Rev. 0.0 |
|
|
AN3230 |
|
|
1.3 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
