GL90A PREAMPLIFIER WIRING GREAT LAKES MODEL P63
●GENERAL
◆OUTPUT TO THE INSTRUMENT FROM THE PREAMP IS UNITY GAIN.
◆WHEN A COMBINATION ELECTRODE IS USED, REFERENCE CONNECTION IS MADE THROUGH THE BNC CONNECTOR.
●TEMPERATURE COMPENSATION
◆FOR AUTOMATIC COMPENSATION, CONNECT A 301Ω NTC ELEMENT BETWEEN TERMINALS 3 AND 8 IN THE INSTRUMENT. THE PREAMPLIFIER HAS NO AUTO TC CAPABILITY.
◆IT IS ALSO POSSIBLE TO USE A Pt1000 ELEMENT INSTEAD OF THE 301Ω THERMISTOR FOR AUTO TEMPERATURE COMPENSATION. CONSULT THE INSTRUMENT MANUAL FOR DETAILS.
●EARTH GROUNDING WARNING
◆DON'T LET ANY OF THE LEADS OR THE BNC CONNECTOR TOUCH METAL PIPING, CONDUIT, OR OTHER EARTH GROUNDS. THIS WILL CREATE A"GROUND LOOP" AND CAUSE VERY UNSTABLE OR OFF-SCALE READINGS. TO CHECK FOR A GROUND LOOP, DISCONNECT THE BNC AND PUT AN OHMMETER BETWEEN TERMINAL 5 OF THE PREAMP AND A GOOD EARTH GROUND. YOU SHOULD READ INFINITY. ANY OHMS READING AT ALL INDICATES A SHORT TO GROUND WHICH MUST BE FOUND AND ELIMINATED.
|
|
|
|
Outline Dimension Drawing |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
7/15/96 |
|
|
REV.A |
|
|
GL90A-P63 |
|
|
200 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
