U1KT001/U1KT002/U1KT003 Ultrasonic Reflex Sensor Operating instructions
■These instructions are valid for the products U1KT001, U1KT002 and U1KT003.
■They make it possible to use the product safely and efficiently.
■These instructions are an integral part of the product and must be kept on hand for the entire duration of its service life.
■Local accident prevention regulations and national work safety regulations must be complied with as well.
■The product is subject to further technical development, and thus the information contained in these operating instructions may also be subject to change.
●Use for Intended Purpose
■This sensor is used to detect objects and measure distances.
■Ultrasonic Sensors emit pulsed ultrasonic waves at a certain frequency using air as a transmitting medium. The sensors evaluate the transit time of the ultrasound reflected from the object. Parameters can be taught into the sensors using the teach-in key, via an input or via IO-Link. The output is switched when the preselect-ed switching point is reached. Two independent switching outputs can be set up. Furthermore, the measured value can be read out via IO-Link 1.1. In addition to the reflex mode, two sensors can also be operated in the through-beam mode.
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
19.07.2021 |
|
|
Version 1.6.0 |
|
|
|
|
|
966 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
