RabbitCore RCM2300 C-Programmable Module
●The RCM2300 is a very small core module that packs the processing power of a Rabbit 2000™ microprocessor into 1.84 square inches (11.9 cm²). Two 26-pin headers bring out the Rabbit 2000 I/O bus lines, address lines, data lines, parallel ports, and serial ports.
●The RCM2300 receives its +5 V power from the user board on which it is mounted. The RCM2300 can interface with all kinds of CMOS-compatible digital devices through the user board.
●The RCM2300 takes full advantage of the following Rabbit 2000 and other built-in features:
■ fast, efficient instruction set.
■ five 8-bit timers cascadable in pairs, one 10-bit timer with 2 match registers that each have an interrupt.
■ watchdog timer.
■ 57 I/O (including general-purpose I/O, address lines, data lines, and control lines on headers, and 11 I/O on through-hole connectors).
■ 256K of nonvolatile flash memory to store applications written for the RCM2300.
■ 128K of battery-backable SRAM.
■ fast 22.1 MHz clock speed.
■ provision for onboard backup battery.
■ four serial ports.
●Another RabbitCore module can be used to reprogram an RCM2300. This reprogramming (and debugging) can be done via the Internet using Z-World’s RabbitLink network programming gateway or with Ethernet-equipped RabbitCore modules using Dynamic C’s DeviceMate features.
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2004/5/12 |
|
|
|
019–0101 |
|
676 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.